Airlink101 APO1010 Manual de usuario descargar pdf (Pagina 87)

Î User Name : Enter User Name for PPPoE connection

Î Password : Enter Password for PPPoE connection

Î Reconnect Mode :

9 Always on – A connection to Internet is always maintained.

9 On Demand – A connection to Internet is made as needed.

When Time Server is enabled at the “On Demand” mode, the “Reconnect Mode” will turn out “Always on”.

9 Manual – Click the “Connect” button on “WAN Information” in the Overview page to connect to the Internet.

Î Idle Time : Time to last before disconnecting PPPoE session when it is idle. Enter preferred Idle Time in minutes.

Î MTU : By default, it’s 1492 bytes. MTU stands for Maximum Transmission Unit. Consult with WISP for a correct MTU

setting.

 DNS : Check “No Default DNS Server” or “Specify DNS Server IP” radial button as desired to set up system DNS.

Î Primary : The IP address of the primary DNS server.

Î Secondary : The IP address of the secondary DNS server.

 MAC Clone : The MAC address is a 12-digit HEX code uniquely assigned to hardware as identification. Some ISPs

require you to register a MAC address in order to access to Internet. If not, you could use default MAC or clone MAC

from a PC.

Î Keep

Default MAC Address : Keep the default MAC address of WAN port on the system.

Î Clone MAC Address : If you want to clone the MAC address of the PC, then click the Clone MAC Address button.

The system will automatically detect your PC's MAC address.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 167 168

Sin comentarios

Airlink101 APO1010 Manual de usuario Pagina 87